Self-Priming Electro Water Pump in Cast-Iron JET 132 M 1KW 1,36HP 240V DAB
€216,00 VAT included (22%)
|Availability:||Available Handling Time: Immediate delivery|
|Model||JET 132 M|
|Power Supply||1 x 220-240V 50Hz|
|Motor Efficiency Class||--|
|Flow Rate Q [l/min]||0 - 80|
|Head H [m]||48,3 - 27,2|
|Power Cable||NOT Provided|
|Pump Body||Cast Iron|
SELF-PRIMING CENTRIFUGAL ELECTRO PUMPS
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
CONSTRUCTIONAL FEATURES OF THE PUMP
Cast-iron motor support and pump body.
Motor support in die cast aluminium.
Impeller, diffuser, venturi tube and sand guard in technopolymer Stainless steel wear ring.
Carbon/ceramic mechanical seal.
CONSTRUCTIONAL FEATURES OF THE MOTOR
Asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.
Incorporated thermo-amperometric protection and permanently inserted capacitor in the single phase version.
It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.
Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Liquid quality requirements:
clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral, close to the properties of water.
Liquid temperature range:
for domestic use: from 0°C to +35°C (EN 60335-2-41).
For other use: from 0°C to +40°C
Maximum ambient temperature:
Installation: fixed in a horizontal position
Special executions on request:
different frequencies and/or voltage
Motor protection rating:
Terminal block protection rating:
Standard input voltage:
Single Phase 220/240V 50Hz. Three Phase 230/400 V 50Hz