Lowara CEA Centrifugal Pump Inox CEAM70/5/A 0,55KW 0,75HP 1x220-240V 50hz (0,55Kw - CEAM70/5)
€255,00 VAT included (22%)
|Availability:||Available Handling Time: Immediate delivery|
|Power Supply:||1x230V 50Hz|
|Flow Rate Q [l/min]:||0 - 80|
|Head H [m]:||31,1 - 20,2|
|Motor Efficiency Class:||- -|
LOWARA CEA series and also CEA(N) made of AISI 316
Single-impeller centrifugal electric pumps equipped with IE2/IE3 motors complying with regulation (EC) n. 640/2009
Civil, agricultural, industrial.
Version made of AISI 304
Handling of chemically and mechanically non-aggressive water and liquids, for moderately aggressive liquids, a version with FPM elastomers is available (CEA../..-V).
Water circulation (cold, hot, refrigerated).
"N" version made of AISI 316 for aggressive liquids
Reverse osmosis (where demineralized water is used).
Chlorine dispensing in swimming pools.
Delivery up to 520 l/min (31 mc/h)
Head up to 32 m.
Temperature of pumped liquid:
-10░C to +85░C standard version.
-10░C to +110░C (N and V versions).
Maximum operating pressure : 8 bar (PN 8).
Counter-clockwise rotation facing the pump from the suction port.
Asynchronous, squirrel cage rotor, close construction, external ventilation.
Protection class: IP55.
Class 155 (F) Insulation.
Performances to EN 60034-1 specifications.
- Single-phase versions: 220-240V 50Hz, 2 poles, with automatic reset overload protection up to 1,5 kW.
For higher powers, the overload protection must be provided and installed by the user in the control panel.
- Three-phase versions: 220-240/380-415V 50Hz, 2 poles, the overload protection must be provided and installed by the user in the control panel.
Condensate drain plugs in the standard version.
Close-coupled, single-impeller centrifugal pump featuring axial suction and radial discharge.
Compact construction, with pump coupled directly to motor; special motor shaft extension in common with the pump and supported by ball bearings.
Rotating assembly with back pull-out design, eliminating the need to disconnect the pump body from the pipe line.
Threaded suction and discharge ports (Rp ISO 7).
High performance enclosed Impeller made of AISI 304 stainless steel (AISI 316 for N version).
Mechanical seal with Ceramic/Carbon rings, NBR elastomers, (EPDM for N version) other parts are made of AISI 304 stainless steel (AISI 316 for N version). Mounting dimensions according to EN 12756 (ex DIN 24960) and ISO 3069.
O-rings made of NBR (EPDM for N version).
Mounting pedestal on pump body.
Different voltages and frequencies.
Different material for the mechanical seal and O-rings.