Submersible pump dirty water FEKA600M-A SV 0,55Kw 1x230V 50Hz Float cable5m DAB

Description

DAB serie FEKA 600 SV
SUBMERSIBLE PUMPS with stainless steel pump shaft

APPLICATIONS

The submersible pump of the FEKA series is suitable for lifting sewage water from cesspools, and is capable of handling suspended solid matter with size up to 25 mm.
The level switch allows fixed installation, ensuring automatic operation.

TECHNICAL DATA

Operating range: from 1 to 16 mc/h with head up to 7,45 metres.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Pumped liquid: cesspool sewage water.
Particle size for free passage of solids through the suction grid: 25 mm
Minimum draught depth:
FEKA 600-A: 175 mm
FEKA 600-NA: 38 mm
Max. immersion depth: 7 metres.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.

CONSTRUCTION FEATURES OF THE PUMP

Hydro resistant technopolymer pump body, cover, and suction grid.
Stainless steel motor, roto shaft, and bolts and screws.
Threefold seal with interposed rings with oil pre-chamber.

CONSTRUCTION FEATURES OF THE MOTOR

Submersible type continuous duty asynchronous motor.
Stator enclosed in airtight stainless steel casing, with an outer cover that protects the wiring and the capacitor.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection.
Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with local regulations.
Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Standard voltage: single-phase 220-240V 50Hz, three-phase 400V 50Hz
Standard cables for the single-phase version:
5 metre H05 RN-F for FEKA 600 M-A
10 metre H07 RN-F for FEKA 600 M-NA
Standard plug for the single-phase version: SCHUKO CEE 7 - VII - UNEL 47166-68
Standard cables for the three-phase version:
5 metres H07 RN-F